Deck Staining and Sealing in Santa Maria for Gray Boards and the Dark Corners

Those dark patches in the shady corners of a deck are often mildew, and mildew stains wood black without rotting it. It comes off when the deck is cleaned.
A deck that's gone gray all over is showing weathered wood. A penetrating stain gives it color again.
A board that feels soft underfoot gets looked at before any stain goes on. It doesn't always mean the whole deck has to go, and if a repair will do, we'll tell you.
What Deck Staining Costs in Santa Maria
- Wood deck, cleaned and stained$700 to $2,200
That's for the boards of a deck near 16 by 20. Staining the railing and the stairs adds to it.
Deck Staining and Sealing for Wood Decks
Santa Maria Deck Builders does deck staining in Santa Maria on redwood, cedar and pressure-treated decks. Deck refinishing is another name for it: the wood is cleaned, then stained and sealed.
The railing and the stairs get the same cleaning and the same stain as the boards, so the job takes in the whole deck.

How a Deck Gets Cleaned and Stained

A look at the old finish
Up on the deck, we look at what's on the wood now: bare gray boards, a stain that's worn thin where people walk, or an old paint or film finish that's peeling. That tells us how much cleaning the deck needs, and whether anything has to come off first.

Cleaning
The deck is cleaned from end to end: the dirt, the gray surface of the boards and the mildew.

Dry wood
Once it's clean, the deck is left to dry, since the stain goes onto clean, dry wood.

The stain
Then the penetrating stain goes on.
Get Your FREE Estimate
What Can Raise or Lower Your Price
How big the deck is
A deck bigger than about 16 by 20 costs more to clean and stain, and one that's smaller costs less.
A finish that's peeling
An old paint or film finish that's peeling has to be stripped before the new stain goes on, and stripping adds to the price.
Why Wood Decks Go Gray and Dark

Damp air and shade
Here the air is damp for most of the year, and on a deck the damp hangs on longest in the shade, out of the wind and around plants, which is where mildew gets started.
Sun, salt and sand
A deck lies flat, open to the sun and the weather, and flat wood often takes the worst of it. Salt, sand and repeated wetting and drying are hard on wood too, and they wear out a finish sooner.
Choosing a Deck Finish
What is the best finish for an old wood deck?
A penetrating stain, one that soaks into the boards. Film finishes such as paint sit on top of the wood, and on boards people walk across, they tend to peel. Whatever wood your deck is, expect to restain it every few years, again with a penetrating stain.
